In daily life, there are many scenarios in which users use this cable, so how can this cable make the service life of this cable too long?There are three main points to extend the service life of USB. As follows:
(One)Proper use of cable
(1)Correct insertion and removal：When inserting a USB cable, ensure that the connector is aligned with the connector. Otherwise, the connector or connector may be damaged. When removing a USB cable, gently pull it out by holding the plug. If you often pull the cable, it is easy to break the internal wire.
(2)Avoid excessive cable bending: Do not bend the USB cable too much during use, especially near the plug and where the cable is connected to the device. Excessive bending may damage the internal wires, affecting the performance and life of the cable. To avoid excessive bending, you can use some cable management tools, such as cable clips and wire winders, to arrange cables properly, avoid arbitrary winding and bending.
(3)Avoid pulling and dragging cables:Do not use the USB cable to drag the device, which will bring a lot of tension to the cable, easy to cause the internal wire to break or plug will be damaged. When moving the device, disconnect the USB cable first and then move the device to avoid pulling the cable when it is connected.
(Two)Keep USB cables safe
(1)Avoid high temperature and humidity: High temperature causes deformation and aging of the plastic cover of cables, affecting cable performance and service life. A humid environment may cause internal rust of cables, resulting in short circuits. Do not place the USB cable in direct sunlight or near a heat source, such as a heater or electric heater. At the same time, avoid placing cables in damp places, such as bathrooms and kitchens.
(2)Prevent cables from squeezing and colliding: When storing USB cables, avoid placing them under heavy objects or getting squeezed. Squeezing may damage the internal structure of the cable and affect its performance. Care should also be taken to avoid cable collisions, so as not to cause plug or interface damage. Cables can be placed in a special storage box or bag to protect them from damage.
(Three)Cables need to be cleaned and checked regularly:
(1)Clean cables: Periodically cleaning USB cables can remove dust and dirt, keep the appearance of the cable clean, and prevent these impurities from entering the interface, which affects the performance of the cable. To clean the cable, gently wipe the surface of the cable with a clean damp cloth. Be careful not to let water enter the interface. For stubborn dirt, you can use less detergent, but make sure the detergent does not cause damage to the cable.
(2)Checking cables: Periodically check the appearance and performance of USB cables to find and rectify faults in a timely manner. Check whether the cables are damaged, broken, or deformed, and whether the plugs and interfaces are loose or in poor contact. If the cable is faulty, replace or repair it in time to prevent device damage or safety accidents.
