USB2.0 and 3RCA driver cables

This cable USB2.0 is widely used in daily life, it provides the highest data transfer rate of 480 Mbps, which is far faster than the original USB 12Mbps 40 times. This USB2.0 device uses four cables, two for data transmission and two for power supply and ground. This cable is designed to support up to 500mA of current and is used to connect devices such as keyboards, mice, cameras, phone chargers, computers, etc.

The length specification for this cable is up to 5 meters to ensure stable connection and performance. The specifications of the cable include differential impedance of 90 euros and common mode impedance of 30 euros, and these parameters are related to the insulation and thickness of the cable and the density of the twisted pair. In order to improve signal integrity and electromagnetic interference performance, USB2.0 requires the use of shielded twisted pair.

This combination also comes with a 3RCA audio signal cable. Used by users to transmit analog video and audio signals in daily life, it consists of three coaxial cables that transmit audio (red and white) and video (yellow) signals respectively. This cable is different from the USB2.0 cable in purpose and design, and this 3RCA audio signal cable is not used for data transmission.

When choosing USB cable 2.0 and 3RCA, there should be the following four main points：

(1)Users need to make sure that the cable supports the desired signal conversion type, such as audio and video.

(2)When verifying the compatibility between the adapter and the device, you also need to verify the compatibility between the operating system and the hardware interface.

(3)Users need to check whether this cable supports the video resolution and audio quality they need.

(4)The user must finally consider the power requirements of this cable, and some adapters may need to be connected to an external power supply.

In everyday use of this cable, users can use the cable to connect the USB interface to a device with a 3RCA interface. This cable can convert the digital signal output from the USB device into the analog signal of the 3RCA interface, so that users can play audio or video on the old device through the 3RCA interface. This type of cable Bridges the gap between modern and older devices, allowing users to continue using devices without USB ports.

Hot Tags: USB2.0 and 3RCA driver cables, China USB2.0 and 3RCA driver cables manufacturers, USB Extension Cable, USB 2 0 Embedded Panel Cable for Vehicle, AUX Audio Cable, USB To Type B Printer Data Cable, Scanner Cable for Symbol, Scanner Cable for Honeywell